manualshive.com logo in svg

ECGMAC EM-301, User Manual

Share
Download
ECGMAC EM-301 User Manual Download Page 30

 

 

27

“ON/OFF” key (about 3 seconds) and wait 15 seconds for system initialization. After the ECG 

beeps and starts working, the ECG is ready for operation. 

5.1.2 Shutdown with the mains supply 

Press “ON/OFF” key (about 3 seconds) in the working state. After the LCD screen display is off, 

pull the power cord and grounding cable out. 

 

5.1.3 Startup and shutdown with the battery 

When power cord is disconnected, the ECG will use the built-in battery. And the DC indicator is lit. 

Then the same startup and shutdown operation with the mains supply. 

 

5.1.4 Battery charge 

If the built-in rechargeable battery is weak when mains supply is used,it will be recharged 

automatically at the same time. 

Please exactly follow the above instruction. Otherwise, disordered messages will be       

displayed on the screen. When the shutdown prompt message is displayed, do not press the 

“ON/OFF” button continuously. 

5.2 The ECG main interface 

Press “ON/OFF” key (about 3 seconds) to turn on. After system initialization, the first page of the 

main interface will be shown as the following figure: 

 

Summary of Contents for EM-301



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands