GB
GB
46
Note:
When shaving, move the shaver against the growth of the beard and stretch the skin with the other
hand in the same time. When shaving, you can pull the device towards yourself and away.
Shaving with a back shaving attachment
1. Press and hold the release button (fig. 9, fig. 1) and open the back shaving attachment (fig. 9, fig. 2). Release
the lock (fig. 9, fig. 3) by a gentle push in the direction of the arrow marked on the lock.
2. Insert the lower part of the device into the lower part of the back shaving attachment holder. Then press
the upper part of the holder, insert in the holder the upper part of the device and snap the lock (fig. 10).
3. Shave your back using the back shaving attachment handle moving it up and down (fig. 11).
4. To detach the cutter from the back shaving attachment, open the lock and pull the shaver out of the holder
(Figure 12).
5. Press and hold the release button and fold the back shaving attachment (fig. 13).
Tips for trimming and shaving:
•
Make sure that the flat part of the trimming comb is completely in contact with the skin.
•
When trimming, we recommend first using a longer cut attachment and shorten it gradually by using
other attachments.
•
Turn the device off in the breaks between shaving and cutting,.
CLEANING
The device has to be cleaned after each use. Always make sure that the device is off and unplugged from power
supply before cleaning.
Warning:
Never use compressed air, metallic sponges, abrasive or aggressive cleaning agents such as benzine
or acetone to clean the shaver.
1. Take out the removable trimming comb and rinse it in water. Before reassembly, allow it to dry thoroughly.
2. Carefully pull the shaving head unit out of the device by gripping it by the teeth (Figure 14).
Warning:
Do not press on the shaving blade. Protect it from sharp objects which could damage it.
3. Rinse the unit under lukewarm running water (fig. 15) and leave it to dry completely.
4. Using the supplied cleaning brush, carefully clean the inside of the shaving head or rinse it under lukewarm
running water (Figure 16). Shake off the excess water and let the device dry. Use only the brush supplied
with the appliance.
5. Lubricate the mechanism under the head and carefully return the unit in the shaver (fig. 17).
6. We recommend after each use to lubricate gently the moving teeth of the cutting blade using the silicone
oil.
•
You can use the supplied oil.
•
Use only acid free oil.
•
DO NOT USE vegetable oils, grease or oils with solvents for lubrication. The solvents evaporate and
leave a strong layer of lubricant in the mechanism, which can slow the movement of the blades.
•
Remove the excess lubricant with a dry, lint-free cloth.
7. Clean the back shaving attachment with wet cloth.
TROUBLESHOOTING
DANGER!
Do not attempt to repair the device by yourself.
In any malfunction disconnect the plug from the electric outlet.
Malfunction:
Check the following:
The device does not work
•
Is power supply ensured during charging?
•
Is the battery empty?
