45
EN
Symptom
Cause
Correction
The remote controller
does not work
• There are no batteries in the
remote controller.
• The batteries are dead.
• The remote controller is not
directed at the remote controller
sensor.
• The remote controller is outside of
its operating range.
• The device is turned off .
• Insert two AAA/1.5 V batteries.
• Replace the batteries with a new
set.
• Make sure the remote controller is
directed at the remote controller
sensor.
• Make sure the remote controller is
close enough to the device.
• Turn the device off and unplug
from the socket. Afterwards,
restart the appliance.
TECHNICAL SPECIFICATIONS
ECG XENON C 111 BLACK v2
Power
AC ~100–240 V, 50/60 Hz
Power input
<20 W
Standby power input
<0.5 W
Operating conditions
Temperature
-10 °C – +35 °C
Relative humidity
5 % – 90 %
The disc’s output
Frequency range
20 Hz – 20 kHz
S/N ratio (fi lter A)
>80 dB (1 kHz)
Dynamic range
70 dB (1 kHz)
Distortion and noise
-60 dB (1 kHz)
Fluctuation
Under measurable level
Tuner
FM band range
87.5–108 MHz
Power output (max.)
5 W × 2
Frequency range
±1.5 dB (20 Hz – 20 kHz)
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
Changes in text and technical parameters reserved.
08/05