44
EN
AUTO/STOP
Press to start an automatic station search, press again to stop the search.
Preset options can be selected via numerical buttons.
For example, pressing
0
and
2
selects preset option 2; pressing
1
and
5
selects preset
option 15.
Press to skip to next preset.
Press to skip to previous preset.
NOTE:
In FM radio mode, buttons
/-
,
MUTE
are also active. More details can be found in the
introduction to CD control in this chapter.
TROUBLESHOOTING
Before bringing the device to the repair centre, please check the following table.
Symptom
Cause
Correction
No power
• The power supply is not properly
connected to the socket.
• Check the proper connection of
the power supply.
Sound
No sound or distorted
sound.
• Audio cables are not connected
properly.
• The volume is set to min.
• The sound is muted.
• Connect the audio cables properly.
• Increase the volume.
• Press
MUTE
on the controller to
activate the sound.
• Press
PLAY/PAUSE
.
Cannot play disk
• The disk is inserted improperly.
• The parent lock classifi cation
coded on the disk is higher than
the parent lock level set on the
device.
• The disk is not compatible with
this device.
• The disk is contaminated.
• Make sure the disk is inserted with
the label facing upward.
• Change the parent lock settings.
• Clean the disk
After connecting a
USB device, the device
stops working
• The connected USB device most
likely is a certifi ed type.
• The device does not play
uncertifi ed USB devices. In case
the player stops working, turn
it off , unplug the power cord
from the socket and remove the
USB device. Plug the power cord
back in. The device should work
normally.
The buttons on the
device do not work
• The device is experiencing
interference caused by static
electricity etc.
• Turn the device off and unplug
from the socket. Plug the power
cord back in and turn on the
device.
