GB
35
3. If you want to return the hand-held vacuum cleaner to the holder in the floor vacuum cleaner, first insert
the lower part of the hand-held vacuum cleaner into the floor vacuum cleaner holder and then push the
hand vacuum cleaner in such a way that it clicks into place.
Vacuuming
Note:
The floor vacuum cleaner is not working without a properly inserted and charged hand-held vacuum
cleaner.
The vacuum cleaner is great for cleaning the stairs, making this unpleasant work a breeze.
1. Make sure that the handheld vacuum cleaner is properly installed in its place.
2. Press the switch button on the handle of the floor vacuum cleaner (
A
). The suction power of the vacuum
cleaner can be controlled by the speed setting button (
B
).
Using the tapered nozzle 2 in 1
You can use the tapered nozzle directly with the handheld vacuum cleaner.
Mopping
You can also mop the floors using the vacuum cleaner. Before you start mopping, you have to fill the tank with
water.
1. Open the lid of the water tank (
N
) and fill the tank
O
).
2. Attach the floor mop to the tank (
P
) and then snap it on the floor nozzle of the vacuum cleaner as shown
below.
CLEANING AND MAINTENANCE
Replacement and cleaning of the dust container filter
To make sure that the vacuum cleaner always delivers optimum performance, empty the dust container after
each use and clean the filter.
1. Remove the hand-held vacuum cleaner from the holder in the floor vacuum cleaner.
2. Press the dust container release button and remove the container.
3. Remove the dust container filter.
4. Empty the container.
5. Rinse the container in cold water and
before inserting it back in the dust container allow the filter to
dry thoroughly
. Do not wash the dust container filter in the washer. For drying, do not use a hair dryer,
allow the filter let to dry by itself.
6. Replace the filter carefully in the dust container.
NEVER
use the vacuum cleaner without inserted filter.
7. Insert the dust container in the handheld vacuum cleaner.
WARNING:
The suction opening must be permeable and free of obstructions in all circumstances.
Otherwise, it could lead to engine overheating and damage to the appliance.
Note:
Depending on the intensity of use, we recommend replacing the filter every 3 to 6 months with
a new one in order to guarantee top performance of the appliance.
Cleaning the vacuum cleaner
Make sure before cleaning that the vacuum cleaner is not connected to the charger.
Use soft and slightly moist cloth with a few drops of detergent to clean the vacuum cleaner. Never use solvents
or other abrasive cleaners.
Summary of Contents for VT 4220 3in1
Page 71: ......
