English
English
6
CLEANING AND MAINTENANCE
Warning:
•
Always unplug the power cord from the outlet before any maintenance and cleaning.
•
Empty the dust container (16E) after each use and clean the HEPA motor filter, see the following instructions.
•
Do not use water or any other liquids when cleaning the vacuum cleaner’s filters!
Cleaning the dust container (16E)
1. Press the dust collection system button (9) and remove the whole dust collection
system (16) from the vacuum cleaner [Fig.
F
].
2. Press the top cover lock button (16B) and open the top cover (16A) [Fig.
G
].
3. Empty the container.
4. Replace the top cover so that the locks together with the top cover lock button fit perfectly
into place.
5. Insert the dust collection system back into the vacuum cleaner and make sure it snaps
into its place.
Cleaning or replacement of the HEPA motor filter
1. Press the dust collection system button (9) and remove the whole dust collection
system (16) from the vacuum cleaner [Fig.
F
].
2. Remove from the dust collection system (16) the HEPA motor filter (16D ) [Fig.
H
].
3. If the HEPA motor filter is clogged with dust, clean it. Be careful not to damage it.
4. If the filter is especially dirty, replace it with a new one.
5. Replace the HEPA motor filter by pushing on the frame so that the upper tab snaps in
behind the safety catch (16C).
6. Insert the dust collection system back into the vacuum cleaner and make sure it snaps
into its place.
Cleaning and replacement of the output filter
1. Press the lock of the output filter (20) and remove the grille of the output filter (19).
2. Remove the output filter (18) [Fig.
I
].
3. If the output filter is clogged by dust, clean it carefully so that you do not damage it.
4. Replace an especially dirty or damaged output filter for a new one.
5. Insert the cleaned or new output filter back into the vacuum cleaner.
6. Replace the grille of the output filter so that the lock (20) snaps into place.
Cleaning the surface of the appliance
•
Use a soft, slightly damp cloth with a few drops of detergent for cleaning. Never use solvents or other
abrasive cleaners. Never immerse the vacuum cleaner in w3ater or any other liquid and do not rinse it
under running water.
Vacuum cleaner storage
You can remove the hose before storing the vacuum cleaner. Press the locks
at the end of the hose and pull it out of the opening of the vacuum cleaner.
You can attach the telescopic tube with the combined nozzle to the vacuum
cleaner using special holders (12) and (17) in horizontal
J
and also in vertical
K
position.
9
F
16B
G
H
18
19
I
17
J
12
K
Summary of Contents for VP BS6120 Animal
