ECG VP 3120 S, Instruction Manual

Page: 30 / 84

GB
30
30
3. Attach accessories suitable for the given type of fl ooring to the tube (Fig. 2c): brush nozzle for carpets or
hard fl oors (set according to the type of fl oor, see Fig. 2d), the combined tapered nozzle and dust brush for
sofas, curtains and hard to reach places in the corners or between furniture.
4. Starting the vacuum cleaner: Insert the power cable plug in the electrical outlet whose parameters
correspond to the type plate on the vacuum, and then press the power button to start the vacuum cleaner
(Fig. 1c). You can regulate the power using a controller (Fig. 1d).
5. Pulling out the cable: The cable has red and yellow mark at its end. (Fig. 1b). Grasp the plug and pull the cable
out up to the yellow mark. Never pull the cable past the red mark, you could cause damage! If you want to
rewind the cable press the rewind button (Fig. 1e), the power cable rewinds itself into the vacuum cleaner.
1b
1c
1d
1a
1e
2a
2b
2c
2d
Issues
Do not use an appliance showing any signs of damage. Damaged power cords must be replaced by a qualifi ed
authorized service centre. Only this way can you prevent safety risks.
See the troubleshooting guide if your vacuum cleaner does not operate correctly. Refer to an authorized
service centre if you are not able to resolve an issue yourself.
After use
Turn off the vacuum cleaner and unplug the power cord from the outlet. Before you add any accessories or
before cleaning the appliance, always turn the vacuum cleaner off and unplug it from the outlet.
Full dust bag indicator
The vacuum cleaner is equipped with an indicator (15), which changes to red colour, if the dust bag is full or
if the suction hoses are clogged. If the full dust bag indicator is red even after inserting a new bag, switch off
the vacuum cleaner, unplug the power cord and check the hose or tube for jammed objects. If the indicator
remains red, refer to an authorized service centre or your dealer. To prevent overheating and possible damage
to the vacuum cleaner, check the following:
•
All the connections between hose, telescopic
tube and the fl oor brush
• Opening for connecting the hose
• Brush throughput
• Exhaust fi lter
• Motor fi lter
• Dust bag
MAINTENANCE AND CLEANING
3 4
5