![background image](http://html.mh-extra.com/html/ecg/rk-1785-ke-colore/rk-1785-ke-colore_instruction-manual_531132021.webp)
21
EN
DESCRIPTION
7
6
5
1
60 - 70 - 80 - 90 °C
2
3
4
1. Lid
2. Temperature
indicator
3. Temperature control button
4. ON/OFF
button
5. Base
6. Water level indicator
7. Nozzle with removable fi lter
CAUTION
•
Always use cold water when fi lling the kettle.
•
The water level must be between the minimum and maximum levels. Risk of water splashing out when
the kettle is overfi lled.
•
Always switch the kettle off before removing it from the base.
•
Always make sure the lid is well closed.
•
The base and kettle body should not be wet.
•
Only use the kettle in combination with its original base.
USING THE APPLIANCE
We recommend boiling clean water twice before using the appliance for the fi rst time.
•
Fill the kettle with water. Do not overfi ll the kettle, watch the water level indicator. Once you have fi lled
the kettle, do not forget to close the kettle lid to ensure the automatic switch-off mechanism functions
properly.
•
Once the water begins to boil, the kettle automatically switches off .
•
Do not open the lid when pouring water from the kettle.
•
Unplug the cord from the outlet when you are fi nished using the appliance.
•
The kettle is equipped with an automatic safety circuit, which protects the appliance against overheating.
The circuit is activated when the kettle, containing an insuffi
cient amount of water, is switched on. If the
automatic safety circuit was activated, switch the kettle off , unplug the appliance from the power supply
and allow it to cool down for 5 to 10 minutes. You can then refi ll the kettle with water and use the appliance
as you normally would.
Basic use
1. Place the base on a dry and fl at surface and plug the power cord into the outlet. Place the kettle on its base.
2. Press shortly, you will hear a sound and the heating process will start. The default temperature is set to
100 °C and the indicator is red.
3. Once the water is heated, the kettle will be switched off , the indicator will be turned off and you will hear
a sound.
4. Unplug the cord from the outlet when you are fi nished using the appliance.
Advanced functions
1. Press for 3 seconds, you will hear a sound and the water heating process will start, the LED indicator will
fl ash red. Once the water boils (100 °C) the kettle will maintain the water temperature for a 2 hour period
and the indicator will fl ash. During these two hours, the heating process will activate when the water
temperature drops below 85 °C.