![background image](http://html1.mh-extra.com/html/ecg/rb-030-p/rb-030-p_instruction-manual_3877144026.webp)
GB
26
•
The appliance does not operate normally in accordance with the manual. Set only the elements
described in the operating manual.
•
The device shows signifi cant functionality changes, indicating need for service.
•
Do not expose the device to heat sources such as radiators, heating or other heat-producing appliances
such as amplifi ers.
•
Changes or modifi cations not expressly approved by the responsible authority can lead to loss of
authorization to use the device.
USING THE SYSTEM
Installation
Connect power adapter (
C
7
) to the electrical outlet and to DC connector of the adapter. (
C
4
) connect to
the DC 5.5V jack (
C
3
). Radio alarm clock is now ready to use.
Installation of backup battery
You need for backup power of the radio alarm clock lithium battery CR2032 (not included) in case of power
failure of the power grid.
1. Place the device on an even surface.
2. Remove the battery space cover (
C
1
).
3. Insert new CR2032 battery in the battery space (
C
2
) with the symbol
+
upwards as marked.
4. Replace the battery space cover.
If there is a power failure, the LED display goes out and the radio or alarm clock will not function during the
power outage. The new backup battery retains clock settings and other device settings for approximately
3 days. Ensure that a new lithium battery CR2032 is used.
Time setting, 12/24 hour mode and interval for the snooze
1. Press
SET
once (
A
7
), the hours will fl ash. Using arrows a (
A
2
and
6
) set the hour (hold for speedy
change).
2. Press
SET
again, the minutes‘ display starts fl ashing. Using arrows and set minutes.
3. Press
SET
, the display shows and fl ashes symbol “
24H
”. Using arrows and select the time display
format “
12H
” or “
24H
”.
4. Press
SET
, the display shows and fl ashes the symbol “
05
”. Using and set the snooze time (delaying
alarm) in the range 5 to 60 minutes.
5. Press
SET
again (or after 10 seconds if no button is pressed), the device exits the setting mode.
Note:
If you select the 12-hour clock format, the time will be displayed with symbol “P” (PM) in the afternoon
hours. There is no indicator for morning hours (AM).
Setting the alarm clocks
1. Press
again
AL 1.2
(
A
8
) symbol
1
and hour fl ashes. Using arrows and (
A
2
and
6
) set the hour
of the fi rst alarm.
2. Press
again
AL 1.2
to set minutes. Using arrows and set the minutes of the fi rst alarm clock.
3. Press
again
AL 1.2
. The display shows “
OFF
” (alarm off ). If you want to select the source of sound for the
alarm, select using arrows and :
rd:
radio alarm
bu:
buzzer alarm
OFF:
alarm clock is off
4. Press
again
AL 1.2
, the symbol
2
and the hour fl ashes. Using arrows and set the alarm of the second
alarm clock.
5. Repeat the steps 2 and 3 to complete the setting of the second alarm clock.
6. If you press again
AL 1.2
(or if you do not press any button in about 10 seconds), the device exits the alarm
clock setting mode. When you select the radio alarm or the buzzer alarm, that alarm will be activated,
which is indicated by display of symbol
1
and/or
2
on the left side of the display.