EN
56
EN
57
INSTALLING THE TURNTABLE
Charge (bottom side)
Turntable
Support axis
Assembled support
1. Do not lay the turntable face down. The
turntable must always rotate freely.
2. Do not use the oven without the support and
turntable.
3. All food and containers must always be placed
on the turntable.
4. Contact your nearest authorized service if the
turntable cracks or the support is damaged.
INSTALLATION
Remove all packaging material and take out all accessories.
Make sure the oven is not damaged in any way (dented or damaged door etc.). Do not install the
microwave oven if damaged.
Kitchen counter
Oven body:
Remove all protective foil from the oven surface.
Do not remove the light brown foil, screwed to the inside of the oven. This foil protects the
oven magnetron.
Installation
1.
Place the oven on a flat surface with a sufficient amount of space around the appliance to ensure
the proper function of exhaust vents
Opening
30 cm
7.5 cm
7.5 cm
The minimum distance between the oven and the closest wall must be 7.5 cm. At least one
side must be open space.
1) Leave at east 30 cm of free space above the oven.
2) Do not remove oven legs.
3) Do not block exhaust vents. Blocking the exhaust vents could cause damage.
4) Place the oven as far away from the radio or television as possible.
The microwave oven can interfere with the television and radio signal.