![ECG MTD 2071 SE Instruction Manual Download Page 72](http://html.mh-extra.com/html/ecg/mtd-2071-se/mtd-2071-se_instruction-manual_531194072.webp)
GB
72
When you select the mode, set the clock by turning the controller
Time/Menu
(Time/Menu) and confirm by pressing
Clock/Preset</307
(Clock/Preset)
Use the same procedure to set the minutes.
2. Cooking in the microwave oven
1) Select the required power level by pressing the button
Power
(Microwave power) according to the table below.
2) Using the controller
Time/Menu
(Time/Menu) set the required cooking time. Maximum cooking time is 95 minutes.
3) Confirm by pressing the button
Start/+30SEC
(Start/Quick start) and the oven starts to cook.
Cooking power table
Number of POWER LEVEL
presses
Cooking power
Use
1×
100 %
Heating, milk, boiling water, vegetables, beverages
2×
80 %
Rice, fish, chicken, ground meat
3×
60 %
Stewing meat, fish
4×
40 %
Preparing soups, butter softening
5×
20 %
Ice cream softening
6×
0 %
Note:
If you do not select a power level, the oven will work at maximum power level. You can check the power level during cooking by
pressing the button
Power
(Microwave power).
3. Quick start
Press repeatedly the button
Start/+30SEC
(Start/Quick start) to set the cooking time, the oven works at full power. Each press corresponds
to 30 seconds. The longest possible setting in this mode is 10 minutes. After the set time has elapsed, a beep sounds and END is displayed
on the display.
4. Defrosting according to weight
Defrost time and power is set automatically after weight is entered. Weight of frozen foods range: 100–1800 g.
Example:
If you want to defrost 600 g of shrimp.
1) Press once the button
Weight/Time defrost
(Weight/Time defrost).
2) Turn the knob
Time/Menu
(Time/Menu) to select the weight of the shrimps.
3) Start defrosting by pressing the button
Start/+30SEC
(Start/Quick start).
Note:
During defrosting the cycle stops and a beep sounds – turn the food and resume by pressing the button
Start/+30SEC
(Start/Quick
start). If you exceed the maximum weight, use the program
Time defrost
(Time defrost)
5. Defrosting according to time
The oven allows defrosting according to set time.
1) Press twice the
Weight/Time defrost
button (Weight/Time defrost).
2) Set the defrosting time by turning the
Time/Menu
(Time/Menu) knob.
3) Start defrosting by pressing the button
Start/+30SEC
(Start/Quick start).
6. Preset
This function allows you to run one of the previously programmed oven cycles at a set time.
Example:
it is 8:00. You want to start cooking at 11:30.
1) Select the required cooking program (except the defrosting and quick start program).
2) Press once the button
Clock/Preset
(Clock/Preset).
3) Turn the controller to position
Time/Menu
(Time/Menu) and set the hour to 11:00.
4) Press again the button
Clock/Preset
(Clock/Preset).
5) Turn the controller
Time/Menu
(Time/Menu) to set minutes to 11:30.
6) Press once the button
Clock/Preset
(Clock/Preset).
Note:
After setting the Preset, do not use other buttons except to check the Preset time
Clock/Preset
or to cancel it by pressing
Stop/
Cancel
. Before using this function, make sure that the microwave time is set correctly.
7. Automatic cooking
You do not need to set the power and cooking time for the following foods. Just enter the food type and its weight/quantity.
Summary of Contents for MTD 2071 SE
Page 2: ......