![background image](http://html.mh-extra.com/html/ecg/ld-326501/ld-326501_instruction-manual_531238007.webp)
English
English
7
2A – Concrete wall assembly
Apply the wall board to the wall, align into a level position and use it as a template to mark four holes. Drill four
holes 10 mm in diameter and 60 mm deep. Insert four dowels (B2) into the holes and fixate the wall board to
the wall using long screws (B1) and washers (B3). Tighten the bolts firmly, but not too much.
Level (included)
Warning:
Use self-tapping screws to keep the wall plate perfectly aligned with the wall. Ensure that the self-
tapping screws are fully inserted into the dowel without any gap. This ensures a stable mounting of
the bracket and prevents damage to property or injury.