EN
20
EN
21
Warning:
To prevent the device from overheating, do not cover the heater.
The heater must not be placed directly under an outlet.
INSTALLATION
Make sure the package contains all parts necessary for assembling the halogen heater. Contact your
vendor if this is not the case.
Package contents:
1. 1 halogen heater
2. 1 base
3. 1 operating manual
4. 2 attachment screws
Unplug the device, prior to any form of manipulation, to prevent injury by electric shock.
Requirements on installation
Place the halogen heater on a flat surface with a sufficient amount of space around the appliance to
ensure the proper function of exhaust vents.
The distance between the device and the closest wall must be at least 1 m.
1. Unscrew the wing nut from the bottom part of the main cover.
2. First pull the power input through the hole in the centre of the base and then assemble the main
cover of the device with base.
3. Secure the main cover and base connection with the two wing nuts that were unscrewed
beforehand. Pull the power input through the designated grooves and secure using fastening clips.
DESCRIPTION
Control panel
1. ON/OFF
2. Top halogen tube ON
3. Bottom halogen tube ON
4. Oscillation ON
4
3
2
1
Summary of Contents for HH 920
Page 6: ...CZ 5 ...
Page 12: ...SK 11 ...
