![background image](http://html1.mh-extra.com/html/ecg/ewf-1064-da/ewf-1064-da_instruction-manual_531354058.webp)
GB
58
Problem
Possible cause
Troubleshooting
No water is coming in the
washing machine.
The water tap is closed.
Open the water tap.
The inlet hose may be twisted.
Check the inlet hose.
Clogged inlet hose.
Clean the fi lters of the inlet hose. (*)
The inlet fi lter is clogged.
Clean the fi lter of the inlet valve. (*)
The door is not properly closed.
Close carefully the washing machine door.
The washing machine
does not drain water.
The drain hose is clogged or twisted.
Check the drain hose.
Pump fi lter is clogged.
Clean the pump fi lter. (*)
The laundry is not distributed in the
washing machine evenly.
Distribute the laundry evenly.
The washing machine
vibrates.
The feet of the washing machine are
not adjusted.
Adjust the feet. (**)
You did not remove the lock screws.
Remove the lock screws. (**)
There is small amount of laundry in
the washing machine.
Does not prevent washing machine
operation.
Overloading the washing machine or
uneven distribution of laundry.
Do not exceed the recommended amount
of laundry and distribute the laundry in the
washing machine evenly.
The washing machine touches
surrounding surfaces.
Install the machine so that it does not touch
the surrounding surfaces. Leave at least 2
cm of space between the washing machine
and the wall or other surfaces.
Excessive amount of foam
in the detergent drawer.
You used too much detergent.
Press Start/Pause To prevent formation of
foam, mix one teaspoon of fabric softener
in half a litre of water and pour it into the
detergent drawer. After 5–10 minutes press
Start/Pause button. Use correct amount of
detergent in the next washing.
Unsuitable detergent.
Use only detergents intended for automatic
washing machines.
Unsatisfactory washing
results.
Your laundry was too soiled for the
selected program.
Select suitable program (see Program table).
Insuffi
cient amount of detergent.
Use more laundry detergent.
Load size exceeds the maximum
capacity of your washing machine.
Do not exceed the maximum load capacity
of your washing machine.
The water may be too hard.
Dispense the amount of the detergent
according to the detergent manufacturer's
recommendations.
Uneven distribution of the laundry in
the washing machine.
Distribute the laundry in the washing
machine evenly.
Water is drained from
the washing machine
immediately after fi lling.
The end of the drain hose is too low.
Place the drain hose in correct height (**).