![background image](http://html1.mh-extra.com/html/ecg/ewf-1064-da/ewf-1064-da_instruction-manual_531354052.webp)
GB
52
Customizing standard programs with additional functions
Before you start a program, you can use the
button for selection of additional function
7
to select one
additional function, which changes the standard program run. An overview of these functions is listed below
•
Press repeatedly the
button for selection of additional function
, until the indicator of the additional
function, which you want to activate, lights up on the front panel.
•
If the indicator of the additional function is continuously lit then the function will be activated once the
wash program starts.
•
If the indicator of the additional function fl ashes
it is not
activated. This could have one of several reasons:
•
the required additional function is not available for the selected program.
•
the wash program is in a phase when it is no longer possible to select one of the additional functions
or
•
the requested additional function is not compatible with the previously activated additional function
Overview of additional functions
After selecting the appropriate function, the indicator on the front panel lights up as shown in the description
of each function below.
Speed up the program
If the laundry you put in the washing machine is not too dirty, you can shorten the wash cycle
through this function.
Note:
If you put less laundry in your washing machine than half the washing capacity of the washing
machine, the washing machine switches automatically to a standby mode that shortens the
washing program and reduces water and electricity consumption. Activation of the standby
mode will be indicated by the quick rinse indicator.
Program selection
Select the appropriate program for the type of laundry; see “Table of programs”.
Table of programs
The duration of the program may vary depending on the type and weight of the laundry, the inlet water
temperature and the ambient temperature.