![background image](http://html2.mh-extra.com/html/ecg/etf-2170-da/etf-2170-da_instruction-manual_4857338063.webp)
GB
GB
63
NOTICE:
1. For safety reasons, regulations require an area of at least 1 m² per 8 g of refrigerant for this type of
equipment. For 150 g of propane, the minimum allowable room size would be 18.75 m³.
2. Coolant: Risk of fire / poisoning risk / risk of material damage and damage to the appliance. The appliance
contains coolant, R290, which is environmentally safe but flammable. Improper disposal may result in fire
or poisoning. Dispose of the appliance properly and take care not to damage the refrigerant circuit.
•
Type of coolant: R290
•
Amount of gas: 150 g
•
POD (Potential ozone depletion): 0
•
PGO (Global warming potential): 3
1. Risk of explosion and fire! Remove all lighters and matches from the pockets.
2. Do not place the dryer next to an open flame and sources of fire.
TROUBLESHOOTING
The dryer is equipped with systems that are continuously checking during drying to take the necessary
precautions and warn you of any malfunction.
WARNING:
If the problem persists even though you applied the steps provided in this section, contact your
vendor or an authorized service. Never try to repair a malfunctioning product.
TROUBLE
CAUSE
SOLUTION
The drying process takes too
long.
The pores in the dust filter are
clogged.
Wash the dust filter with warm
water.
The heat exchanger is clogged.
Clean the heat exchanger.
Ventilation grilles on the front of the
device are blocked.
Open the doors/windows to prevent
excessive temperature rise in the
room.
Scale has accumulated on the
humidity sensor.
Clean the humidity sensor.
You have loaded too much laundry.
Do not load too much laundry in
the dryer.
The laundry is not wrung out
enough.
Wring laundry in the washing
machine at a higher speed.
The laundry is wet after
a drying run.
The warm garments appear damper than they actually are after drying.
It is likely that the selected program
was not suitable for the type of
laundry.
Check the clothing labels, select the
appropriate program for the type of
laundry, or use timer programs.
The pores in the dust filter are
clogged.
Wash the dust filter with warm
water.
The heat exchanger is clogged.
Clean the heat exchanger.
You have loaded too much laundry.
Do not load too much laundry in
the dryer.
The laundry is not wrung out
enough.
Wring laundry in the washing
machine at a higher speed.