English
English
7
The description and information of the appliance may vary according to the type of model. This
appliance is not intended for use as a built-in appliance.
DESCRIPTION
This description only applies
to information regarding the
components for the appliance.
Individual parts may differ according
to the particular appliance model.
A) Freezer
B) Refrigerator
1. Freezer Shelf
2. Refrigerator shelves
3. Drawer for storing fresh fruit and
vegetables
4. Adjustable feet
5. Door compartment for bottles
6. Door compartment
7. Thermostat
Picture is for illustrative purposes
only. Differs according to the
specific model of the appliance – see
information sheet
INSTALLING AND TURNING ON THE APPLIANCE
•
You can contact the service technicians to install and turn on the device properly.
•
Before connecting the electricity, make sure that the voltage stated on the label corresponds to the
voltage in the socket / voltage for the electricity system in the building.
•
The outlet must be accessible after installing the appliance.
Installing the device
•
Place the refrigerator away from any sources of heat and in a well-ventilated position.
The refrigerator should be located a minimum of
50 cm
away from radiators, gas stoves
and other heat sources, and
5 cm
away from electric stoves.
•
Leave free space of minimum
15 cm
above the appliance.
•
Connect the plastic spacer to the condenser on the rear wall of the refrigerator to
prevent the refrigerator from leaning against the wall and thereby reduce its power.
•
Do not place heavy items on the refrigerator.
•
If the appliance is installed beside another refrigerator or freezer, keep a minimum
distance of
2 cm
to prevent vapour condensation.
•
The refrigerator must stand firmly in a horizontal position. Use the two adjustable front feet for levelling.
1
7
2
3
4
6
5
A
B
