53
EN
DESCRIPTION OF THE RECEIVER
Front and back panel
Front panel
2
1
3
DVT 1350
DVT 970
1.
STANDBY MODE INDICATOR:
Visual indication of the receiver status. The indicator will be on when the
device is in standby mode.
2.
REMOTE CONTROL SENSOR:
Receives signals from the remote control.
3.
USB:
Data input from USB memory stick.
Back panel
1
2
3
4
5
DVT 1350
DVT 970
1.
RF IN:
This input is used for connecting an
external antenna.
2.
RF LOOP THROUGH:
This input enables
leading the VF signal to your TV or other video
device.
3.
COAXIAL:
This input can be connected with the
coaxial input of your audio system supporting
surround sound.
4.
HDMI OUT:
Use this input to connect HDMI
devices.
5.
TV SCART:
Use this input to connect the TV.
6.
VCR SCART:
Use this input to connect the DVD
player or other video device.
7.
POWER CORD:
Used for connecting the device
to the electrical network.
1.
RF IN:
This input is used for connecting an
external antenna.
2.
COAXIAL:
This input can be connected with the
coaxial input of your audio system supporting
surround sound.
3.
HDMI OUT:
Use this input to connect HDMI
devices.
4.
TV SCART:
Use this input to connect the TV.
5.
DC IN 5V:
Used for connecting a 5V DC power
adapter.
*1
Note:
*1) If an external disk is connected to the USB port, we recommend
using an adapter providing DC 5 V / 1.5 A (not included)
If not stated otherwise, the guide uses the DVT 1350 model and its remote control for illustration
purposes.