25
EN
Starting the signal reception manually
You can start the signal reception any time by pressing the WAVE button. After you press it, the device starts
receiving the time signal at once.
Unsuccessful signal reception
If the time reception was unsuccessful, the wave symbol in the upper part of the transmitter icon disappears,
as well as the WAVE OK indicator. The device will try to receive the signal every hour, for maximum 4 hours.
In the event that the signal reception will be unsuccessful after inserting the batteries or after resetting
the device, the device will try to receive signal for 10 minutes in the course of 3 hours, until it succeeds in
receiving the signal.
Manual clock setting
Time zone and language setting (TIME ZONE)
1. Press
the
SET/WAVE
button for a few seconds to switch to the time zone and language setting.
2. Press
-
button to switch between languages.
3. Press repeatedly the
+
button to change the time zone, until the display shows the required time zone.
Setting the calendar
1. Press
the
SET/WAVE
button after setting the time zone and the language.
2. Press repeatedly the
+
and
-
buttons to set the year.
3. You can speed up the change of data by holding the
+
or
-
button.
4. Press
the
SET/WAVE
button to confi rm the year and continue to date setting.
5. Press repeatedly the
+
and
-
buttons to set the date.
6. You can speed up the change of data by holding the
+
or
-
button.
Clock setting
1. Press
the
SET/WAVE
button after you set the calendar.
2. Press repeatedly the
+
and
-
buttons to set minutes. When you press
+
or
-
button, you will reset the
seconds.
3. Hold
the
+
or
-
buttons to set the time faster.
Format setting
1. When you set the required time, press the
SET/WAVE
button to switch to format setting mode.
2. By pressing the
+
button, you switch between the 12h and 24h time display mode.
3. Press
the
-
button to switch between displaying temperature in °C or in °F.
4. Press
SET/WAVE
to confi rm the settings and exit the set up mode.
Using the alarm
Setting the alarm time
1. Press repeatedly the
+
and
-
buttons to set the alarm time. The alarm time will be displayed on the clock
with the symbol AL.
2. You can speed up the alarm setting by holding the
+
or
-
buttons.
Activating the alarm
•
Move the switch to the desired mode position –
ALARM ON/ALARM OFF/SNOOZE
.
Activating the alarm with snooze
1. Move the alarm clock switch to “
NL ON + SNOOZE ON
” position. The clock display will show symbol
and Zz. The snooze function is now activated.
2. When the alarm sounds, press the
SNOOZE/LIGHT
button. The alarm will be silenced and will sound
again in 5 minutes.
3. If you want to deactivate the alarm with snooze, move the switch to “
NL ON + ALM ON
” or “
ALL OFF
”
position.
Summary of Contents for DH 010
Page 2: ......
