English
English
33
Connection speed test
Highlight Internet connection speed test and press OK. The TV will measure the bandwidth of the internet
connection and display the result when it is finished.
Advanced Settings
Highlight Advanced settings and press OK. On the next screen, you can change the IP and DNS settings of
the TV. Select the desired address and press the Left or Right button to change the setting from Automatic to
Manual. You can now manually enter IP and/or DNS values. Select the appropriate item from the drop-down
menu and use the number buttons on the remote control to enter new values. When you are done and want
to save the settings, highlight Save and press OK.
Wireless connection
Connecting to a wireless network
Your TV may have trouble connecting to some networks with hidden SSIDs. To
make your modem's SSID visible, change the modem's settings in its system.
Broadband to ISP (1)
Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous use of 2.4 and 5 GHz
bandwidth is designed to increase bandwidth. It's optimised for smoother and
faster HD video streaming, file transfers and wireless gaming.
•
Frequencies and channels vary depending on the area.
•
The transmission speed varies depending on the distance and number
of obstacles between the transmission products, the configuration of the
products, the radio wave conditions, the traffic and the products you are
using. Transmission may also be interrupted or disconnected depending on
radio wave conditions, DECT phones or any other WLAN 11b devices. The
normal transmission rate values are the theoretical maximum for wireless standards. This is not an efficient
data transfer rate.
•
The locations where transmission is most effective vary depending on the user environment.
•
Wireless TV option supports modem type 802.11 a,b,g & n. The use of the IEEE 802.11n communication
protocol is strongly recommended to avoid potential problems when viewing video.
•
If modems with the same SSID are located nearby, you must change the SSID of one of them. Otherwise,
connection problems will occur.
Configure wireless device settings
You can start the connection process from the Network Settings menu, where you set the Connection
Method
to
Wireless Device
.
If you wish to search for available wireless networks, highlight
Search wireless networks
and press
OK
. A list
of all the networks found will appear. To connect to the network, select the desired network from the list and
press
OK
. A network with a hidden SSID cannot be discovered by other devices. To connect to a network with a
hidden SSID, scroll down the list of wireless networks you've found, highlight Add new network, and press
OK
.
Enter a network name and use the appropriate connection options to select the security type.
Note:
If the modem supports N mode, you can set it up.
If the selected network is password protected, enter the correct password using the virtual keyboard. Use the
directional buttons and the
OK
button on the remote control to use this keypad.
Wait until the IP address is displayed.
This means that the connection has been established. To disconnect from the wireless network, select
Connection method
and use the Left or Right button to set it to
Off
.
If you're connected to a wireless network, the Network menu will show Disconnect and your wireless network
profile will be saved, so your TV will connect to the same network automatically whenever you switch to a
wireless connection. To disconnect from the wireless network and delete the saved wireless network profile,
highlight Disconnect and press
OK
.
