![background image](http://html.mh-extra.com/html/ecg/24-h02t2s2/24-h02t2s2_instruction-manual_531172018.webp)
English
English
18
Parameters for switching polarizations and LNC bands or for switching multiple LNCs among each other are
set in the table on the right�
When you press the button
GUIDE
you call up the list of transponders of the selected satellite where you can
select, add, delete and edit� A transponder overview is displayed in the table on the left, and on the right you
can set parameters to switch polarizations and LNC bands or to switch multiple LNCs among each other�
TransPonder
OK Select
Edit
Exit Delete Add
Scan
Transponder
Setting satellite
Quality
Ku HOTBIRD 6,7,A,8
Type LNB
09750/10600
LNB power
13/18V
22 kHz
Auto
Toneburst None
DiSEqC1�0 LNB2
DiSEqC1�1 None
Motor None
You can add transponders by pressing the yellow button
Add
and delete transponders by pressing the red
button
delete
� If you mark one or more transponders by pressing
OK
, you can start their auto-tuning by
pressing the blue button
Scan
� The signal quality of the selected transponder is displayed on the scale in the
middle�
End OK Confirm
Transp
Setting satellite
Quality
09750/10600
13/18V
Auto
Nothing
LNB2
Nothing
Motor None
Edit
Transponder 013
Frequency 121�63
Symbol (pc/s)
27500
Polarity V
You can edit frequency, symbol speed and polarization of the selected transponder when you press the green
button
Edit
� Save the changes by pressing rhe button
OK
�
Summary of Contents for 24 H02T2S2
Page 2: ......