![background image](http://html.mh-extra.com/html/ecg/24-h02t2s2/24-h02t2s2_instruction-manual_531172017.webp)
English
English
17
Schedule setup
1 ONE HD
Type Recorder
Mode Once
Time start�
11:47 05 Lis
Time end
12:17 05 Lis
Select
Back
The record is successfully saved
Recorder 11:47 ~ 12:17 on CH�1
05/11/2016
Exit
If a set time conflict occurs, a warning message appears�
Signal information
You can view information about the received signal in this menu� This function is not accessible for an analog
reception�
Signal information
Channel: 5 (177�50 MHz)
Network
Unknown modulation
Quality 100 (Good)
Signal 0 (Weak)
CI information (requires CA module input)
With this feature you can call up and configure the information about the inserted CA module�
Setting satellite
You can access this menu if you select
Satellite
as your signal source� Here you can select, add, delete and edit
satellites and their transponders� You can also start automatic tuning of one or more satellites or transponders
from this menu�
TransPonder
OK Select
Edit
Exit Delete Add
Scan
Satellite
Setting satellite
Quality
Ku HOTBIRD 6,7,A,8
Type LNB
09750/10600
LNB power
13/18V
22 kHz
Auto
Toneburst None
DiSEqC1�0 LNB2
DiSEqC1�1 None
Motor None
The left table shows an overview of pre-loaded satellites� If you mark one or more satellites by pressing
OK
, you
can start their auto-tuning by pressing the blue button
Scan
�
Summary of Contents for 24 H02T2S2
Page 2: ......