Warning: A brake system that is dirty, worn, damaged or not adjusted
correctly could decrease your control and cause you to fall. Make a full
inspection of the breaks before each ride. If the breaks do not operate
correctly, do not ride your bicycle. Adjust the brakes to take the electric
bicycle the nearest bike shop for adjustments. A disc brake and disc get
very hot during use and could burn skin. Also, the disc edges can be
sharp and could cut skin. Do not touch the disc or disc brake when hot or
when disc turns.
Applying an e-bike throttle. (not used for any mid-motor e-bike models)
The bike should not move since the brake is applied and e-brake cutoff
switch is then engaged. Test that the bike will now proceed with the brake
not engaged. Engage the throttle and release the breaks. This time the e-bike
should move forward, make sure you have a clear path in front of you or no
person stands in your path.
If the brakes do not cut off the power immediately discontinue use and
contact EccoBike™. If you believe that any other items in the above checklist
are out of order immediately stop use until the issue is serviced.
(PAS)
When riding with pedal assist active, you should always start in
( PAS )“Level 1”. Be sure you are in a bright area with no obstacles before
beginning with the PAS. Once you begin pedaling, the pedal sensor will
activate the motor after 1-2 seconds. If there are any obstacles in your path,
you could collide with them if you are not anticipating the power of the
pedal assist system to provide propulsion. Ensure you are firmly mounted
on the bike and ready to ride with power assist before starting to pedal.
Summary of Contents for GAZELLE
Page 1: ...USER s MANUAL GAZELLE...
Page 5: ...Insert Remove or Adjust Saddle Height...
Page 9: ...C300S Manual...