- 19 -
7. Assembly of nozzle with gun
1) Fix and tighten together the nozzle joint and material nozzle.
2) Put charging electrode into the material nozzle and fix nozzle joint to extension, tightening
it with the spanner (Hex. 10).
3) Put the air cap in the holding nut and fix them to the barrel and tighten by hand.
The fixing nut and air cap are to be put together as an assembly.
As it is made of resin, excessive tightening might lead to the damage to the inner screw of the
nozzle mount joint. Pay attention when attaching and removing.
Air cap can be slightly tightened by fingers. If it is tightened too much, paint nozzle might loosen
when changing the direction of the air cap. This might lead to coating failure.
Materials of air caps or nozzles are resin which can withstand the solvent. However, immersion
for long time might deteriorate the original performance. Wash them with solvent and dry
sufficiently with air blow before storage.
The Electrostatic spray nozzle is very precisely
made. Special cautions must be taken to keep it
clean and free from damage.
Nozzle Joint
Charge Electrode
Paint Nozzle
Air Cap
Fixing nut
Barrel
CAUTION
CAUTION
CAUTION
