Page 1 of 8
Installation Instructions
Camera/Monitor System
The EC7000-QK Camera and Monitor Kit from ECCO is designed
to provide a driver with video and audio from up to four cameras (kit
is supplied with one EC2014-C) individually or together on a split
screen for ultimate driver awareness. When properly installed and
used in conjunction with vehicle mirrors, ECCO’s EC7000-QK assists
drivers during hazardous parking and backing situations. This manual
provides information about installation, function, safety, maintenance,
replacement parts and warranty.
Failure to install or use this product according to manufacturer’s recommendations may result in property damage, serious injury, and/or death to
those you are seeking to protect!
!
WARNING!
1. Proper installation combined with operator training in the use, care, and maintenance of emergency warning devices are essential to ensure
the safety of you and those you are seeking to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high current arcing,
which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this warning device. Install this product so that output performance of the
system is maximized and the controls are placed within convenient reach of the operator so that s/he can operate the system without losing
eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use, the vehicle operator
should ensure the projection of the warning signal is not blocked by vehicle components (i.e., open trunks or compartment doors), people,
vehicles or other obstructions.
Do not install and/or operate this safety product unless you have read and understand the safety information
contained
Specifications:
Monitors
EC7000-QM 7” LCD Monitor
Image
7” LCD Color, 16:9
Controller
4 Camera
Voltage
12-24VDC
Power Consumption
25 W Max
Mirror Imaging
Yes (via Camera and Monitor Switch)
Split Screen Feature
Yes
AV Compatible
Yes
DVR Compatible
No
Audio
Yes
Contrast/Brightness
Yes
Light Sensor
Day/Night Auto Dim
Camera Selection
Trigger Wires and Monitor
Connection: CAM
Female 4 Pin Threaded
Connection (Monitor Pigtail)
Male 22 Pin
Housing
Plastic
Mounting
Permanent - HD (2 bracket options
provided)
Mech. Vibration
Pedestal Bracket - 3G
Cradle Bracket - 8G
Weight
1.26 lbs
Dimensions (WxHxD)
7.21”x5.04”x1.24”
Operating Temp
4°F to 158°F
Remote Control
Yes
Current Draw
2A
Approvals
FCC, CE, RoHS
Installation, Wiring and Function
Caution!
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines,
vehicle upholstery, etc. that could be damaged.
!
Camera
EC2014-C
Image
1/3” CMOS Color
Effective Pixels: 725 x 488
Voltage Requirement
12V
Power Consumption
3 W
Lens
F=2.8mm / F=2.0
Lens Angle
120°
Audio
Yes
Light Sensor
Auto Switch B&W
Infrared LEDs
11 (10M Max. Visibility)
Pigtail Connection: CAM
Male 4 Pin Threaded
Housing
Aluminum Alloy
Mech. Vibration
10g
Mounting
Rear/Front
Dimensions (WxHxD)
2.87”x2.99”x2.60”
Operating Temp.
-22°F to 158°F
IP Rating
IP69K
Approvals
FCC, CE, C-Tick, E13/R10
Current Consumption
175mA Max
