920-5201-00 Rev. B
Page 3 of 8
Important!
Mount the camera at a location that provides the best view of the area immediately behind the vehicle.
Generally, mounting locations toward the top of the vehicle provide the best field of view. Lower mounting locations reduce
the field of view and increase the likelihood of damage from road spray.
1. Find an appropriate location for installation.
2. Drill holes according to the size of U-bracket and fix the U-bracket.
3. Drill a 3/4” (19mm) hole next to U-bracket.
4. Install the camera and sun-visor on U-bracket.
5. Connect the camera tail with the extension cable from inside the vehicle.
6. Loosen the hex head screws and adjust the camera’s position to get the best view angle in the monitor.
Figure 1
Installation:
Camera Model EC2014-SVC
Wiring:
EC2014-SVC
Important!
Waterproof all connections whether inside or outside the vehicle by using sealant and wrapping with
insulation tape. Wrap tape tightly, overlapping by one-half widths so there are no gaps.
Figure 2
13 PIN FEMALE 13 PIN MALE
CAM 3
CAM 2
CAM 1
Brown Trig. Wire CAM 3
Blue Trig. Wire CAM 2
White Trig. Wire CAM 1
Black (Ground) -
Red (Power) +
2A INLINE FUSE SUPPLIED
WIRING DEFINED