Caution!
When drilling into any vehicle surface, make sure that the area is free from any electrical wires, fuel lines,
vehicle upholstery, etc. that could be damaged.
!
Installation, Wiring and Function
920-5201-00 Rev. B
Page 2 of 8
Notes:
1. Larger wires and tight connections will provide longer service life for components. For high current wires it is recommended
that terminal blocks or soldered connections be used with shrink tubing to protect the connections. Do not use insulation
displacement connectors (e.g., 3M Scotchlock type connectors)
2. Route wiring using grommets and sealant when passing through compartment walls. Minimize the number of splices to
reduce voltage drop. High ambient temperatures (e.g., under-hood) will significantly reduce the current carrying capacity of
wires, fuses, and circuit breakers. All wiring should conform to the minimum wire size and other recommendations of the
manufacturer and be protected from moving parts and hot surfaces. Looms, grommets, cable ties, and similar installation
hardware should be used to anchor and protect all wiring.
3. Fuses or circuit breakers should be located as close to the power takeoff points as possible and properly sized to protect the
wiring and devices.
4. Particular attention should be paid to the location and method of making electrical connections and splices to protect these
points from corrosion and loss of conductivity.
5. Ground termination should be only be made to substantial chassis components, preferably directly to the vehicle battery.
6. Circuit breakers are very sensitive to high temperatures and will “false trip” when mounted in hot enviroments or operated
close to their capacity.
Monitors
EC5603-SVM 5.6” LCD Monitor
EC7003-SVM 7” LCD Monitor
Image
5.6” LCD Color, 4:3
7” LCD Color, 16:9
Controller
Internal/3 Camera
Internal/3 Camera
Voltage
12/24VDC
12/24VDC
Power Consumption
5 W
6 W
Mirror Imaging
Yes (via CAM switch)
Yes (via CAM switch)
Split Screen Feature
No
No
AV Compatible
No
No
DVR Compatible
No
No
Audio
Yes
Yes
Contrast/Brightness
Yes
Yes
Light Sensor
Day/Night Auto Dim
Day/Night Auto Dim
Camera Selection
1-3 Via Trigger Wires
1-3 Via Trigger Wires
Connection: CAM
Female 4 Pin Threaded
Female 4 Pin Threaded
Connection (Monitor Pigtail)
Male 13 Pin
Male 13 Pin
Connection: CB
N/A
N/A
Housing
Plastic
Plastic
Mounting
Permanent - HD (2 bracket options
provided)
Permanent - HD (2 bracket options
provided)
Mech. Vibration
Pedestal Bracket - 3g
Cradle Bracket - 8g
Pedestal Bracket - 3g
Cradle Bracket - 8g
Weight
2.67 lbs
3.34 lbs
Dimensions (WxHxD)
6.32”x4.52”x1.07”
7.28”x5.07”x1.06”
Operating Temp
-4°F to 158°F
-4°F to 158°F
Remote Control
Yes
Yes
Approvals
FCC, CE/R10, C-Tick, E13
FCC, CE/R10, C-Tick, E13