580/03.05.23/V2
P a g e |
16
of 29
Ecco Stove | Foster House | 2 Redditch Road | Studley | B80 7AX | United Kingdom
T
| +44 (0) 1527 857 814
E
W
| www.eccostove.com
For all patents
–
See Addendum
A light oil can be used to “freshen” the paint finish (but only when the stove is cold and
not under fire) such as WD40. Apply such oil with a nylon pad such as Scotch Brite or
similar rather than using a lint cloth
–
which will leave bits of lint on the stoves surface.
21.
ASSEMBLY
Your Ecco Stove 580EC2 is delivered in 7 main structural parts being base section; grate
section; 2 x sides; one back section; lower top; upper top and one baffle block. Twelve
further secondary parts one door and frame including glass; cast iron grate; 2 x back baffle
boards; 2 x inner left and right cheeks two spacer blocks and two horizontal baffles.
Ancillary parts and one pair of gloves for operating the handles and fueling and one circular
thermometer
APPLIANCE ASSEMBLY Silicon Carbide parts are both heavy and can be damaged. Lifting by
two people is recommended.
a)
Base Section To be placed on a level structural
hearth capable of bearing 200kg. The hearth
must be laid level and the stove positioned a
minimum of 75mm away from a non-
combustible wall to allow space the outside
control assembly or 350mm from sides and 200
mm from stoves rear to a combustible
wall.
b)
Grate Section Fit cone shaped diablos into
the sockets of the base section to locate the
grate section. Place the grate section on and
bump into position with a rubber mallet to
bed in.