Chapter I: Overview
Thank you for purchasing EC Line products; we are committed to continuously
maintenance the product quality and providing better after-sales service. In order to
take full advantage of our devices, we recommend read through this manual before
the driver installation.
1.1 Safety Information
TS-1710BF is fully compliance with the relevant requirements of the national
standard GB/4943-2001 IT equipment security.
Make sure the electricity meets the power requirements (such as voltage,
frequency) before installation; and the grounding of the power outlet is
running properly.
Lightning may damage the product, unplug the network cable, power cable
or any other conductors during lightning storms.
Do not unplug the components and connections (except for the USB device)
when the power is on.
Do not open the cabinet of the product by a non-professional technician.
Do not leave any item or liquid inside the product; do not place any objects
into the ventilation holes, it may cause short-circuit of the internal
components and may cause fire or electric shock.
In accordance with the relevant explanation in national standards
GB/T9813-2000 microcomputers general specification. After the computer
is below the temperature of 10 ° C of environment storage, please place the
machine in room temperature (10-35 ° C) conditions for more than two hours
to avoid damage from low temperature. In the meantime, please do not
remove the packaging and allow the computer to restore the natural
temperature, and avoid heating up too fast to cause the computer to
generate the occurrence of frost and condensation that might bring electrical
damage.
Strict compliance with the electrical appliance standard;
Safe use voltage range: 100V ~ 240V & 50Hz/60Hz;
Verify that the power outlet is available to connect to a reliable ground;
Keep the device clean, dry, away from dust, moisture and direct sunlight;
Do not share the same power outlet with high-power consumption electrical
devices, keep distance from high level magnetic interference;
Power off the monitor after use as to extend using life;
Do not use sharp points, draw, cut the touch screen to ensure the normal use
of it;
Switch off the power supply before plug / unplug the communication cable or
connect to an external device;
Non-professional and technical personnel is not allowed to open the machine,
otherwise take upon the consequences;
