background image

Digital Signage Kiosk User Manual 

 

                                                                                 

   

3

 

 

1.  OVERVIEW

 

Thank you for purchasing the EC Line all-in-one digital signage kiosk, EC-Line is committed to 

continuously improve product quality and provide better after-sales service. In order to take full 

advantage of our devices, we strongly recommend that you take the time to read this manual before 

diving into software solution. 

 

Note: Information in this manual may change without prior notice. 

 

2.  SAFETY INFORMATION 

Please read the below safety precautions before use. 

 

 

WARNING

   

-  If you ignore the warning message, you may cause seriously personal injured or death. 

 

CAUTION

 

If you ignore the caution message, you may

 cause slightly injured or the product may be 

damaged. 

 

WARNING

 

-  Indoor Use Only.   

 
 

3.  PRECAUTIONS IN INSTALLING THE PRODUCT 

 

WARNING

 

• Keep away from extreme temperature such as in direct sunlight, near a radiator or a heating vent. 

-  It may cause overheat in such condition which can cause deformation of the enclosure, electrical 

shock, fire or malfunction. 

• Keep the packing anti-moisture material or vinyl packing out of the reach of children.   

-  Anti-moisture material is harmful if swallowed.    If swallowed by mistake, force the patient to 

vomit and visit the nearest hospital.    Additionally, vinyl packing can cause suffocation.    Keep it 

out of the reach of children.   

• Do not put heavy objects on the product or sit upon it. 

-  If the product collapses or is dropped, it can cause injury.    Many injuries, particularly to children, 

must pay particular attention.   

• Do not leave the power cord or signal cable unattended on the pathway. 

-  The passerby can trip or fall, which may cause electrical shock, fire, product breakdown or injury.   

• Install the product in a neat and dry environment. 

-  Dust or moisture may cause electrical shock, fire or product damage.   

Summary of Contents for EC-WDS Series









































Reviews: