Ebyte NT1-B User Manual Download Page 28

Page: 28 / 31

Chengdu Ebyte Electronic Technology Co.,Ltd.

NT1-B_User_Manual

Instruction storage description (Add instruction, Left picture software right picture web page):

Instruction storage description (Delete, Left picture software right picture web page):

Clear instructions:

Configurable gateway configuration (Left picture software right picture web page) :

4.5.6 Automatic upload

In client mode (TCP client, UDP client etc.), the gateway will automatically poll the instructions in the stored

instruction table and upload it to the server, and the feedback format (Modbus RTU format or Modbus TCP format)
can be selected according to the requirements. ) and the command polling interval (0-65535ms).

For instruction pre-storage, refer to "Configurable Gateway - Instruction Storage Instructions", and

automatically upload the upper computer/web page configuration:

Summary of Contents for NT1-B






























Search results

Summary of Contents for NT1-B

Reviews:

Related manuals for NT1-B

Brands by name

Popular brands

Ebyte NT1-B, User Manual

Search results

Summary of Contents for NT1-B

Reviews:

Related manuals for NT1-B

Brands by name

Popular brands