Ebyte EA01-SG, User Manual

Page: 11 / 28

Copyright ©2012–2020
， C
hengdu Ebyte Electronic Technology Co., Ltd
10
C
hengdu Ebyte Electronic Technology Co., Ltd. EA01-SG UserManual
CHAPTER Ⅲ : EXPLANATION OF EBYTE EXTENDED INSTRUCTIONS
AND FUNCTIONS
3.1 EBYTE TRANSPARENT TRANSMISSION APPLICATION ENABLE
AT ORDER RESPONSE
AT+EBYTEAPP=<ENABLE><NEWLINE> OK
AT+EBYTEAPP EBYTE APP ENABLE:<ENABLE>
OK

This at Command Configures Whether To Use TCP, DUP, EBYTE Cloud, MQTT And COAP Transparent Transmission
Applications. The Default Is To Enable at+EBYTEAPP=1. When Access To Mobile Is Required at+EBYTEAPP=0 Is Required
To Close The Transparent Transmission Application When One net Cloud, Telecommute Cloud Or Socket Extended at Command
Is Transmitted.

Configuration Parameter Description:<Enable>,0 Means To Close The Transparent Transmission Application,1MeansToOpen The
TransparentTransmission Application.

Note:When Power-Off Saving Is Required, Input at+NRB Command Will Save Parameters To Flash,And Automatically Restart To Take
Effect.
3.2
SELECT THE SERVICE TO AUTOMATICALLY CONNECT WHEN POWER ON
AT ORDER RESPONSE
AT+POWONLINK=<TYPE ><NEWLINE> OK
AT+POWONLINK POWER ON LINK SOCKET TYPE: <TYPE>

The AT command configuration selects the SOCKET the at is automatically connected when powered
on. By default, only the TCP/UDP channel is automatically connected when powered on.

Description of configuration parameters: , 1 means the MQTT channel, 2 means the COAP channel, 3
means the power is connected to the Eater Cloud channel

Note:When Power-Off Saving Is Required, Input at+NRB Command Will Save Parameters To Flash,And
Automatically Restart To Take Effect.