Ebyte E90-DTU(400SL47), Manual

Page: 18 / 30

Chengdu Ebyte Electronic Technology Co., Ltd E90-DTU(400SL47) User Manual
Copyright ©2012-2023, Chengdu Ebyte Electronic Technology Co., Ltd 17
2
Abnormal operation status log
printing enable
According to the different
abnormal working status to print the
corresponding different formats of
the log, for details, see section 6.5,
abnormal working status log printing
details.
0 Disable (default)
1 start using
1 0 firing power Power and current are
nonlinearly related, and the power
supply is most efficient at maximum
power.
Current does not decrease
proportionally with power
0 0
46.5
±
0.5dBm (default)
0 1
1 0
1 1
05H Read/Write REG2
Channel Control (CH)
0-83 represent a total of 84
channels respectively E90-DTU
(400SL42)
Actual frequency =
410.125+CH*1M
06H Read/Write REG3
7 Enable RSSI bytes
When enabled, the module
receives wireless data, which will
follow an RSSI intensity byte when
output through the serial port TXD.
0 Disable (default)
1 start using
6 transmission method
The module will recognize the
first three bytes of the serial data as:
address high + address low +
channel, and use them as the wireless
transmit target.
0 Transparent transmission (default)
1 fixed-point transmission
5 relay function
When the relay function is
enabled, the module will initiate a
forwarding if the destination address
is not the module itself.
In order to prevent data
backhauling, it is recommended to
use it in conjunction with fixed-point
mode. That is, the destination address
is different from the source address.
0 Disable trunking (default)
1 Enable relay function
4 LBT Enable
When enabled, wireless data
will be listened to before
transmitting, which can avoid
interference to a certain extent, but
may bring data delays
The LBT has a maximum dwell
0 Disable (default)
1 start using