Ebyte E800-DTU V8 Series User Manual Download Page 9

Page: 9 / 17

Chengdu Ebyte Electronic Technology Co.,Ltd

E800-DTU(433Lxx-485)-V8 UserManual

，

Chengdu Ebyte Electronic Technology Co.,Ltd

4. Interface definition

4.1.

Power supply

Users can choose

①

the VCC and GND terminal power supply, E800-DTU can use 8~ 28V DC power supply,

but it is recommended to use 12V or 24V DC power supply.

4.2.

RS485 interface

E800-DTU can use the 485_A terminal and the 485_B terminal in

②

to connect the A terminal and the B terminal of the RS-485

of the device respectively.

Pin NO.

Definition

Function

Description

VCC

Screwing power interface,

positive

8 ~ 28V DC, 12V or 24V( recommended )

GND

Screwing power interface,

negative

The power supply negative pole is connected to

the system ground and the housing

GNDA

RS232 common terminal

Connected to RS 232 device GND

B/TXD

Serial port terminal

RS-485: Connected to RS 485 device interface

RS-232: Output terminal,connected to RS 232

device RXD

A/RXD

Serial port terminal

RS-485: Connected to RS 485 device interface

RS-232: Input terminal, connected to RS 232

device TXD

Note: The DTU will be in poor communication when connecting multiple devices , while connecting a single

Summary of Contents for E800-DTU V8 Series
















Search results

Summary of Contents for E800-DTU V8 Series

Reviews:

Related manuals for E800-DTU V8 Series

Brands by name

Popular brands

Ebyte E800-DTU V8 Series, User Manual

Search results

Summary of Contents for E800-DTU V8 Series

Reviews:

Related manuals for E800-DTU V8 Series

Brands by name

Popular brands