CC1310 Wireless Module
E70 Series User Manual
Copyright ©2012–2017, Chengdu Ebyte Electronic Technology Co., Ltd.
5
/
34
1. Features
Consumption advantage:
The receiving current is 8mA, and stand by current is 2uA. Battery-powered application is available.
Fixed transmission
: Module can communicate with other modules which work in different channels and addresses. It makes
networking and repeater easy. For example: module A transmits AA BB CC to module B (address: 0x00 01, channel: 0x80). The HEX
format is 00 01 80 AA BB CC (00 01 refers to the address of module B, and 80 refers to the channel of module B). Then module B
receives AA BB CC (only module B).
Broadcast transmission:
To set the module address as 0xFFFF, then the module can communicate with other modules in the
same channel.
FEC:
Forward Error Correction has high coding efficiency & good correction performance. In case of sudden interference, it can
correct the interfered data packets proactively, so that the reliability & transmission range are improved correspondingly. Without
FEC, those data packets can only be dropped.
Parameter saving:
The parameters will be saved after setting and will not be reset when powered off. Once powered on, it will
work according to the previous parameters.
Ultra-small size:
With half the size of similar modules, E70 series are suitable for applications which have strict requirement on
the size.
Secondary development:
All IO ports are led out for secondary development.
Customized Service:
If the existing UART modules cannot meet customers’ requirements, Ebyte can provide customized
firmware. Ebyte has provided customized solutions for many well-known enterprises.
Complete series:
Ebyte has developed complete series of CC1310 modules with different size, frequency, power and packing.
CC1310 owns different packing and the main difference is the amount of GPIO.
