Chengdu Ebyte Electronic Technology Co.,Ltd.
E106-xxxTxxS User Manual
Copyright ©2012–2023
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
17
38400
Distance first
6.160
15.031
28.083
Speed first
4.701
11.085
11.080
57600
Distance first
4.392
10.352
19.101
Speed first
3.373
7.569
7.583
115200
Distance first
2.478
5.364
9.890
Speed first
1.867
3.874
3.890
* There will be some errors in the experimental test data, please refer to the actual physical test *
6.3 General Transmission Mode (Mode 1)
Type
When M0 = 1 and M1 = 0, the module works in mode 1
send
Subcontracted transmission according to 55 bytes per package using the air rate configured by the user;
The user can enter the data through the serial port, and the module will initiate the wireless transmission.
receive In the non-transmitted state, the data can be received normally.
6.4 User configuration mode (mode 2)
Type
When M0 = 0 and M1 = 1, the module works in mode 2
send
Only the remote configuration instructions can be transmitted.
receive
Only receive the remote configuration instruction responses.
configure
The user can access the register to configure the module operating state.
6.5 Sleep mode (mode 3)
type
When M0 = 1 and M1 = 1, the module works in mode 3
send
Unable to transmit the wireless data.
receive
Unable to receive the wireless data.
pay attention to
When entering from the hibernation mode to the other mode, the module will reconfigure the
parameters, and the AUX remains low during the configuration process;
After the output high level, so it is recommended that the user detect the AUX rising edge.
