background image

Chengdu Ebyte Electronic Technology Co.,Ltd

E30-900M20S User Manual

Copyright ©2012–2021,Chengdu Ebyte Electronic Technology Co.,Ltd.

3

Disclaimer

The information in this document, including the URL address for reference, is

subject to change without notice. The document is provided "as is" without any
guarantee responsibility, including any guarantee for marketability, suitability for a
specific purpose, or non-infringement, and any guarantee for any proposal,
specification or sample mentioned elsewhere. This document does not bear any
responsibility, including the responsibility for infringement of any patent rights caused
by the use of the information in this document. This document does not grant any
license for the use of intellectual property rights in estoppel or other ways, whether
express or implied.

The test data obtained in the article are all obtained by the Ebyte laboratory, and

the actual results may vary slightly.

We hereby declared that all brand names, trademarks and registered trademarks

mentioned in this document are the property of their respective owners.

The final interpretation right belongs to Chengdu Ebyte Electronic Technology

Co., Ltd.

Notice :

Due to product version upgrades or other reasons, the contents of this manual may be changed. Ebyte

Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any

hint or noticet. This manual is only used as a guide. Chengdu Ebyte Electronic Technology Co., Ltd.

makes every effort to provide accurate information in this manual. However, we does not guarantee

that the contents of the manual are completely free of errors. All statements, information and

suggestions in this manual do not constitute any express or implied guarantee.

Summary of Contents for E30-900M20S












Reviews: