Ebyte E180-Z6907A, User Manual

Page: 14 / 41

Chengdu Ebyte Electronic Technology Co.,Ltd E180-Z6907A User Manual
Copyright ©2012–2019
，
Chengdu Ebyte Electronic Technology Co., Ltd.
4-13
6.3 Functional parameter description
The module provides a wide range of configurable parameters that can be flexibly adapted to the actual application
needs to build different forms of network.
Configurati
on
informatio
n
Attribute Parameter range Function Description
PANID Read/write 0x0000
～
0xFFFF The PANID is the network identifier of ZIGBEE and is
used to determine the identity of the network to which it
belongs. All devices in the same network must have the
same PANID. When the end-device or router is
configured as 0xFFFF, it can join any network that
already exists on the same channel
；
Local
network
address
Read
0x0000
～
0xFFFF
It is used to distinguish each node in network. Each
device is in the same network. The local network
address must be unique. When the network is not added,
the network address of the device is 0xFFFF. After
joining, the short address of the device is allocated by
the coordinator. The coordinator is fixed at: 0x0000;
Network
status
Read
0
、
2
Indicates the network status of the current device,
including no network, successfully joining the network;
Target
network
address
Read/write 0x0000
～
0xFFFF
The current device communication destination (short
address) can be switched at any time through
configuration commands;
Local MAC
address
Read
64bitMAC The MAC address assigned by this module network
cannot be changed by user (re-entry network to change);
Target
MAC
address
Read/Write 64bitMAC
In fixed-point mode, use long address to send;
Device
type
Read/Write
E
、
S
They are: end-device and sleep end-device;
Channel Read/Write CH11
～
26 The physical channel through which ZIGBEE works;
Transmit
mode
Read/Write
0
、
1
、
2
、
3
、
4
、
5
The transmission modes of the configuration module
are: broadcast mode, multicast mode, short address on
demand mode, long address on demand mode, protocol
on demand, and protocol multicast. For details, please
see the corresponding mode function introduction;
Output
mode
Read/Write
0
、
1
、
2
、
3
、
4
、
Data output mode of the configuration module:
配
Transparent transmission;
Data + short address;
Data + long address;