Chengdu Ebyte Electronic Technology Co.,Ltd.
E104-BT12LSP User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
12
Health Server
0002
Health Client
0003
Generic OnOff Server
1000
Generic OnOff Client
1001
Generic Level Server
1002
Generic Level Client
1003
Generic Default Transition Time Server
1004
Generic Default Transition Time Client
1005
Light Lightness Server
1300
Light Lightness Setup Server
1301
Light Lightness Client
1302
Light HSL Server
1307
Light HSL Setup Server
1308
Light HSL Hue Server
130A
Light HSL Saturation Server
130B
Light HSL Client
1309
VENDOR MODEL
（
pass-throug model ID
）
0001A8
Generic OnOff Server
1000
Master 1
Generic OnOff Client
1001
Generic Level Server
1002
Generic Level Client
1003
4.1.3.2 Unicast,Element
An address corresponds to an element from the Model introduction above. We can call it an elemental address. It is
the unique address assigned to a Node node by a PROVISION device during a PROVISION process. Each Node device
in the same Mesh network may have multiple addresses.E104-BT12USP is a Provision device and E104-BT12NSP is a
Node device.
Introduction to Use:
4.2 Data Format
All data from module serial port interactions, including parameter configuration, network control, and data
transmission, meet the following format requirements.Any other data will be deemed invalid and the module will not
respond.The parameter configuration is used for the current module's parameter configuration, SIG messages are
standard Mesh control messages defined for SIG, and transmission messages are hundreds of millions of custom data
transmission messages.
Length
（
1byte HEX
）
Payload
（
N byte HEX
）
N
Parameter configuration
SIG Message
Pass-through Message
