Ebyte E103-W05A User Manual Download

Page: 3 / 33

Chengdu Ebyte Electronic Technology Co., Ltd.

，

Chengdu Ebyte Electronic Technology Co., Ltd

6.4.1 AT+CIOMODE Set the working mode of GPIO................................................................................ 22

6.4.2 AT+CIOWRITE Set the GPIO level................................................................................................... 23

6.4.3 AT+CIOREAD Read GPIO level........................................................................................................23

6.4.5 Pin application example...................................................................................................................... 23

6.5 Serial port baud rate setting............................................................................................................................24

Chapter 7 Frequently Asked Questions........................................................................................................................26

7.1 Transmission distance is not ideal..................................................................................................................26

7.2 Module is easily damaged.............................................................................................................................. 26

7.3 Precautions......................................................................................................................................................26

7.3.1 The relationship between AP&STA&Server&Client..........................................................................26

7.3.2 Note for transparent transmission....................................................................................................... 27

7.3.2 AP The maximum number of connections connected to the server....................................................27

7.3.2 AT command........................................................................................................................................28

Chapter 8 Welding Operation Guidance.......................................................................................................................29

8.1 Reflow temperature........................................................................................................................................ 29

8.2 Reflow profile.................................................................................................................................................29

Chapter 9 Related Models............................................................................................................................................ 30

Chapter 10 Antenna Guide........................................................................................................................................... 31

10.1 Recommendation of Antenna....................................................................................................................... 31

Revision history............................................................................................................................................................32

About us........................................................................................................................................................................32

Summary of Contents for E103-W05A
































Search results

Summary of Contents for E103-W05A

Reviews:

Related manuals for E103-W05A

Brands by name

Popular brands

Ebyte E103-W05A, User Manual

Search results

Summary of Contents for E103-W05A

Reviews:

Related manuals for E103-W05A

Brands by name

Popular brands