directions), otherwise, please operate the above steps again.
⑧
. You can also transfer files (preferably TXT format files), so try it out.
In addition, customers can also set the socket link to TCP Client in AP mode, set the same way as above, here do not
elaborate.
3.1.4 Module as STA (Station) to connect to other WiFi hotspots
In order to facilitate users to use the module to access the network around the STA role in later sections, a section on
how to access other WIFI nodes for users' reference.
Module as STA (Station) to connect to other WiFi hotspots
①
. Connect the factory E103-W02 base board to the PC via Micro USB cable.
②
. Open the serial debugging assistant "AccessPort" and select the port number; if you don't know the port
number, please check it in the device manager (see the figure below).
③
. Set the serial port debugging parameters (Baud rate: 115200bps, data bit: 8bit, parity bit: no parity, stop bit: 1bit).
(See the figure below)
