Chengdu Ebyte Electronic Technology Co.,Ltd
E01-2G4M01S1B User Manual
Copyright ©2012–2018, Chengdu Ebyte Electronic Technology Co.,Ltd
1-8
Please make sure anti-static measure are taken when installing and using, high frequency devices have electrostatic
susceptibility.
Please ensure the humidity is within limited range, some parts are sensitive to humidity.
Please avoid using modules under too high or too low temperature.
6.3 BER(Bit Error Rate) is high
There are co-channel signal interference nearby, please be away from interference sources or modify frequency and
channel to avoid interference;
Poor power supply may cause messy code. Make sure that the power supply is reliable.
The extension line and feeder quality are poor or too long, so the bit error rate is high;
7 Soldering guidance
7.1 Reflow Soldering Temperature
Profile Feature
Curve feature
Sn-Pb Assembly
Pb-Free Assembly
Solder Paste
Solder paste
Sn63/Pb37
Sn96.5/Ag3/Cu0.5
Preheat Temperature min
（
Tsmin
）
Minimum preheating
temperature
100
℃
150
℃
Preheat temperature max (Tsmax)
Maximum preheating
temperature
150
℃
200
℃
Preheat Time (Tsmin to Tsmax)(ts)
Preheating time
60-120 sec
60-120 sec
Average ramp-up rate(Tsmax to Tp)
Average rising rate
3
℃
/second max
3
℃
/second max
Liquidous Temperature (TL)
Liquid phase temperature
183
℃
217
℃
Time
（
tL
）
Maintained Above
（
TL
）
Time above liquidus
60-90 sec
30-90 sec
Peak temperature
（
Tp
）
Peak temperature
220-235
℃
230-250
℃
Aveage ramp-down rate
（
Tp to Tsmax
）
Average descent rate
6
℃
/second max
6
℃
/second max
Time 25
℃
to peak temperature
Time of 25 ° C to peak
temperature
6 minutes max
8 minutes max
