PX200N_Manual_en-1.11i7
Page 24 / 58
7.1.5.
Access
7.1.5.1.
Service code
It provides security against unauthorized access. It is being used during
programming of device and during remote controlling (in TCP/IP or SMS mode).
Factory setting is
1111
. During the first starting of device (programming) it shall
be changed. Code may consist of up to seven alpha numerical characters.
7.1.5.2.
Restricted user’s service code
Allows restricted access to the parameters of device. When restricted user’s service
code is used following groups of parameters are unavailable: Access, Transmission,
Restrictions, SMS notifications, Link control, RS232 and Phone line. Choosing
unauthorized groups of parameters in “GPRS transmitter configurator” causes error
notification.
Default restricted user’s service code:
2222
7.1.5.3.
PIN of SIM card
As a device operates via GSM network, SIM card is indispensable and it may be
received from phone operator. Before the first use PIN code of SIM card shall be
programmed for operation in given transmitter. PIN code is indispensable for
automatic system launching. In case of card without PIN code, it is possible to enter
any value e.g. 0000.
If you enter wrong PIN number after inserting card and switching on transmitter,
the system will not launch and you may be able to use card after entering PUK card
only (with use of any GSM mobile phone).
Factory setting of PIN in transmitter is
1111
.
7.2.
TRANSMISSION
For the purpose of maximum security of transmission, data is encrypted with AES
key. This option may be used for GPRS and SMS transmission.
After selection of encrypted transmission you may use your own code (256 bytes –
signs 0-9 and A-F) or use default settings.
Selection of not coded transmission means device operation similar to PX
transmitters.
