EBS HandJet 250, Operating Instructions Manual

Page: 13 / 34

20080908#3.0
EBS Ink-Jet Systeme EN
13
EN
2. After the program MENU has
been displayed, choose the in-
stallation option.
3. Follow the instructions displayed
during the installation.
4. After all control program compo-
nents and USB drivers required
have been installed, you can
communicate with your printer via
a radio link - see
Connecting the
Printer with a Computer (via USB
interface)
.
Starting the Control Program
1. Click the EBS printer icon on the
control panel or, if there is no
such an icon, start
EBS-200.exe
from the folder where the control
program has been installed
(
C:\Program Files\ EBS_printers\
EBS-200\ as standard).
2. Once started, the control pro-
gram automatically activates the
find-the-printer(s) function and
signs the printer on, if the printer
is on and the radio communica-
tions link operates properly.
Connecting the Printer with a
Computer (via USB interface)
See figures
B
,
D
and
F
.
The printer communicates with the
computer through module
22 via a
radio link. The module uses an USB
interface
or optionally a RS232 interface
to communicate with the computer - see
Connecting the Printer to a Computer
(via RS-232 Interface)
.
1. Find a free USB port in your
computer.
2. Use cable 27 to connect the USB
port in your computer with socket
23 of module 22 .
!
If USB drivers of module
22
have
been installed during the installation
of the control program (see
Installing
the Control Program
), then the module
is automatically detected and in-
stalled on your computer. Otherwise
you are prompted to indicate the
location of the drivers on the CD.
3. Fix module 22 appropriately in
order to reach the widest radio
transmission range.
!
Do not cover module
22
with unnec-
essary shields or objects, especially
metal ones. Optimally, place module
22
at a certain height, to avoid any
obstacles between the printer and
module
22
.
4. Switch the printer on.
5. Start the control program. The
program will find the printer,
communicate with it and display
a
Printer is found message.
6. Click the key (the key is
available in the communication
window only after the
Adv. op-
tions item has been ticked) to
view the printer configuration.
Data have been transmitted
properly if an
O.K. message is
displayed in the transmission
status window.
!
If you cannot communicate with the
printer, try to configure it in the sys-
tem once again. From the
Guides
menu start the Network configura-
tion creator and follow the creator’s
prompts.