EBS EPX400, Installation And Programming Manual

Page: 5 / 71

EPX400 – Manual Page 5 / 71
1. INTRODUCTION
EPX400 Transmitter is a modern, microprocessor device for data transmission in
real time, capable of simulating a telephone line (PSTN). In case of telephone line
failure or by selecting the appropriate prefix, the device is able to perform a
connection to the monitoring station, allowing you to transfer data from the control
panel via Contact ID (DTMF) or SIA (FSK) protocol.
EPX400 Transmitter provides the highest security of data transmission through up
to five channels of transmission: ETHERNET, GPRS, SMS, PSTN.
The primary purpose is to use the device as a security systems transmission module
in ETHERNET, GPRS and PSTN. The transmitter works with all most popular alarm
systems. Ethernet connection and packet data transmission (GPRS), can reduce the
operating cost of the alarm systems. This device provides an opportunity to send text
messages to private mobile phones.
An advanced encoding methods like a 256 bits encoding key and AES (Advanced
Encryption Standard) provides for security of data transmission. As a result reception
of this transmission is possible with OSM.Server monitoring receiver system.
Furthermore there is possibility to transmit not coded messages that are to be
comprehensible by reception solutions and also by GPRS Server software.
EPX400 transmitter depending on model can be equipped with 2G or 3G modem.
Programming of receiver is possible:
o
Locally: - with computer and “GPRS Transmitters Configurator”
software
- with computer and web browser via Ethernet connection
o
Remotely : - via GPRS connection (or SMS)
- via SMS commands
- via transmission on CSD channel