EPX400 – Manual
Page 25 / 71
7.3.6.
File-> Automatic device settings backup
All configuration settings including reread from devices and saved on devices are to
be automatically saved on hard disc. If during installation on configuring tool settings
have not been changed, files will be saved as follows:
C:\Program Files\ EBS\KonfiguratorLX\configs\EPX400_20000
Folder “EPX400_20000” contains all files associated with programming of the EPX400
with factory number 20000. The name contains date and time of operation and its
type (saving/reading). Files have
.cmi
extension.
7.3.7.
File -> Exit
Finishes program operation.
7.3.8.
Operations -> Read
Function reads data saved in memory of GPRS module. Exchange of data follows on
port selected in section “Select Connection Type” (See below description of option
”Configuration”). Correct reading is confirmed with message on a screen. Data
downloaded from device may be saved on file (see clause 7.3.3.) and use for other
devices.
To use this function it is necessary to define type and parameters of connection. E.g.
for local connection the following view is displayed:
where:
Connection kind – serial port to which module is connected
Access code – service code of transmitter
Detailed description of connections configuration is included in clause 7.3.5.
7.3.9.
Operations -> Send
This function is analogical to the above one, at the same time it enables data saving
into EEPROM module. Correct saving is confirmed with message on a screen.
Summary of Contents for EPX400
Page 19: ...EPX400 Manual Page 19 71 ...
Page 61: ...EPX400 Manual Page 61 71 ...
