71
Indicating work mode
© 2013 EBS
Read-out mode: repeated (RFID=5,5)
After starting of RFID transponder (see:
) device
waits for bringing near to the RFID tag. Wait time (15 seconds) is signalized by light
on "Read-out" button. Device confirms RFID read-out by double, short acoustic signal
and switching "Read-out" button light off and on. Next, device waits 5 seconds for
next RFID read-out. Each read-out is confirmed in the same way. Data is transmitted
after 5 read-outs (FIFO rule)
Data transmission
Data transmission is being signalled with quick flashing of “Checkpoint”
button.
Data transmission
Making out-going voice calls
Procedure of making out-going voice calls begins with pushing and holding
"Call me" button. "Checkpoint" LED starts to blink (like when transmitting data). After
2-3 seconds acoustic signal is generated. Holding down the button will generate next
acoustic signal (after 2 seconds). Then "Checkpoint" button light will start to blink
with frequency of 1Hz.
Battery low
When battery low, it is being signalled with 2-hour advance before switching
off. “Panic” button flashes every 5 seconds and there are two longer sound signals
every minute. It is recommended to charge the device at once (for more information,
go to
).
64
19