64
Active Track (beta version)
© 2013 EBS
GET=[parameter names, separated by commas]
Sending this command returns current value of given parameter (e.g.
GET=SERVER,APN will return for example: 89.172.87.135 erainternet).
LOCATION
Sending this command makes the device send GPS location as a reply.
11
Operation rules
ACTIVE TRACK is an intgrated, wireless device that allows location of the person or
property. Unit has built in GPS receiver and a quad band GSM/GPRS module with
phone function for two way communication.
This functional advanced device can be applied indoor and outdoor because of A-GPS
service, that supports GPS signal from satellites by GSM/GPRS.
In an emergency situation you may send from the unit two types of signals: "Call" or
"Attack".
Optional, device might be equipped built in RFID transponders reader.
RFID transponder read-out
Read-out RFID transponders manual applies only device with built in RFID
transponders reader.
If you wish to read ID-Tag, label or RFID card, press “Read-out” button and
within 15 seconds approach it with reading area (see
). In case of
no read-out, the device returns to normal work mode after that time.
If option of several RFID tags read-out in one session is enabled (see RFID in
) procedure is following: after
push of "Read-out" button first tag must be read in 15 seconds time. Next tags must
be read in time period not longer than set in RFID parameter. The steps can be
repeated until last RFID read-out.
13
21
42