24
7.2.3.1.
Access
7.2.3.1.1.
Access
7.2.3.1.1.1.
Service code
Protects the device against unauthorized access. It is used both during the device
programming process as well as for remote control of the device (in TCP/IP or SMS
mode). It is factory-set to 1111. The code should be changed when starting
(programming) the device for the first time. It may contain up to seven alphanumeric
characters.
7.2.3.1.1.2.
PIN code of SIM card
Because the device operates on a GSM network, the user must get a SIM card from a
mobile network operator. The PIN code of the particular transmitter's SIM card should
be programmed before the transmitter is used for the first time. The code is required
to automatically start the system. If you have a SIM card without the PIN code, enter
any value in this box, e.g. 0000.
If the PIN you enter is incorrect, the system will not boot after you insert the card and
power on the transmitter; you will then need to enter the PUK code (using any GSM
phone) before you can use the card again. The factory-set PIN number of Active Track
Basic+ transmitter is: 1111.
7.2.3.1.2.
Mode operating
Active Track Basic+ is a device that supports data transmission in GPRS technology.
Between the periods of communication with the server, the operating battery-powered
