EBS Ink-Jet Systems EBS-6200, User Manual

Page: 51 / 124

EBS-6200
Printer User's Manual
Chapter 4 - Operating the Printer
#1.0
49
20091020
4.4.2.1. Creating an
In the main MENU select the PARAMETERS SERVICE item and then the
item, type in a block name consisting of up to eight characters and confirm.
NO
•
an
•
O
af
d Editing a New Parameter Block
CREATE NEW BLOCK
TE:
If the block name already exists in the library, the parameters are displayed on the terminal
d can be edited.
nce the parameter block has been created, it remains in the printer’s memory even
ter power supply has been switched off. The block can be deleted.
After the
the para
to be co
For link
Block N
Modifying Parameters
The follo
´
the
¤
´
the
´
the
Y ¤
keys to position the cursor on the last parameter setting.
Change
settings c
key.
NOTE: parameter block has ettings - see
.
!
name has been typed in, a parameter processor is used to input settings. All parameters in
meter menu have their default settings
6
. Any modifications (for modifications see below) need
nfirmed and then a new parameter block with a user-defined name is formed in the library.
ing parameter blocks with subfiles see section
4.4.1.8 Linking File Names with Parameter-
ames
.
wing keys help you to move along the parameter list or to modify settings:
and
£
keys to move the cursor to parameter boxes,
Y¢
( HOME ) or
Y£
keys to position the cursor on the first parameter setting,
¡
( END ) or
Y
s to the settings of each of the parameters are made with the
¡
and
¢
keys. Numerical
ectly from the keypad and con an also be input dir firmed with the
V
No creation or ed direct impact on the current s ition of a
section
4.4.3.5 Print Parameters
4.4.2.2. ting Blocks of Paramete
In the ma
item.
The
sect
The parameter block processor starts running and you can modify the parameter settings. After the
sett
odified and the modifications confirmed, the parameter block is stored in the
libra
For
Blo
NO
!
Editing Exis rs
in MENU select the PARAMETERS SERVICE item and then the EDIT PARAM. BLOCK
display shows the parameter block library from which a block name should be selected (see also
ion
4.4.2 Using Print-Parameter Blocks
).
ings have been m
ry.
linking parameter blocks with subfiles see section
4.4.1.8 Linking File Names with Parameter-
ck Names
.
TE: No edition or modification of a parameter block has direct impact on the current settings.
For details see section
4.4.3.5 Print Parameters
.
4.4
You can create a new block of parameters by copying an existing block and saving it with a different
name. In the main MENU select the
PARAMETERS SERVICE item and then the
COPY & EDIT BLOCK item.
The display shows the parameter block library from which you should select the name of the block to
be copied (see also section
4.4.2 Using Print-Parameter Blocks
).
!
.2.3. Copying and Editing Blocks of Parameters
ng - initial setting suggested by the Manufacturer.
6
Default setti